Maeda CC1485S-1 - Checking;Cleaning;Greasing Door Rails and Rollers

257
[ACT ON RATIONAL USE AND PROPER MANAGEMENT OF FLUOROCARBONS]
The Act on Rational Use and Proper Management of Fluorocarbons (Fluorocarbon Refrigerants
Emission Regulating Act) stipulates that the operating entity (possessor) of air-conditioners
shall endeavor to suppress the emission of fluorocarbons that cause the global warming and
ozone layer destruction. (Liability of the operator of specified product and specifically
designated products: Article 5)
Negligence of such pertinent management practice as the use of fluorocarbons (CFC, HCFC and
HFC) recommended by a manufacturer, inspection and preservation of records of maintenance
services are subject of punishment under said Act.
[INSPECTION DURING SEASON OFF]
Even during season off, the air-compressor need to be operated for 3 to 5 minutes once a month
in order to prevent every moving part from the loss of lubricating oil.
[LIST OF MAINTENANCE ITEMS OF AIR-CONDITIONER]
Inspection and
maintenance item
Details of inspection and maintenance servicing
Recommended
servicing
interval
Refrigerant (gas) Replenished quantity
Every 3
months
Condenser of
air-conditioner
Clogging of fins
〃
Compressor Operating condition
〃
V-belt Extent of damage and state of tension
〃
Blower motor and fan Operating condition (any abnormal noise)
Every 3
months
Control mechanism Operating condition (does it functions normally)
〃
Each pipe joint
Mounted state, loosening of tightened/connected
parts, gas leakage and damage
〃
[9] CHECKING/CLEANING/GREASING DOOR RAILS AND ROLLERS
[INSPECTION]
When the door is opened or closed, if it fails to move
smoothly because it is clogged with dirt or the like, clean
the slide door rail (1) and rollers (2), and grease them.
[METHOD FOR CLEANING THE DOOR RAIL]
1. Open and close the door and remove dirt on the rail (1).
2. Wipe off dirt on rail (1) by using cloth and rags.
[METHOD FOR GREASING THE DOOR RAIL AND ROLLERS]
CAUTION
Do not use excessively viscous lubricants.
Manufacturer's recommendation: "Pando 18C" of ThreeBond Co., Ltd.
1. Spray an adequate amount of spray type lubricating
oil to the rail (1) and rollers (2).
2. After applying the lubricant, slide the door to ensure
that it can be opened and closed smoothly. Contact us
or our sales service agency if it cannot be moved
smoothly.