184
6. While pressing the hook stowage switch, operate the right
work equipment operation lever (1) to the "Hoisting" side
(pull toward you) again and slowly and carefully hoist the
hook block (3) to store it in the lower part of the boom tip.
When the hook stowage switch is pressed, the red lamp of
the rotating warning lamp turns on.
• When the winch is hoisted while the hook stowage switch
is pressed, the hoisting speed becomes slow, which is not
The right figure shows a state in which the hook block (3) is
stored in the lower part of the boom tip.
To Next Page
Loading...
