CLEAN BEFORE INSPECTION OR MAINTENANCE
• Before starting an inspection or maintenance, clean the
Machine and prevent rubbish from entering the Machine
and make sure the safety will be ensured during
Attempt to inspect or maintain the Machine still dirty not
only lessens chance of locating faulty part, but may cause
rubbish or mud entering your eye, or slipping and tripping
that result in injury.
• Always observe the following when washing the vehicle.
• Use antis lip shoes to prevent slips and trips caused by
wet foothold.
• Put on protective equipment when using a high pressure
steam car washer. Avoid an accident from high pressure
water which causes skin laceration or mud or other
substance to fly to eyes.
•
Do not directly spray water onto the electrical system
(sensors and connectors (1)). Water
entering the
electrical system is dangerous and will cause faulty or
improper operations.
To Next Page
Loading...
