Use the accelerator pedal only when the machine stops and you operate the crane.
Never use this pedal during travel operation. An operation mistake may be made, resulting
in serious physical injury.
Use the fuel adjustment dial to adjust engine speed during travel operation.
Use this lever to adjust the engine speed or output during
crane operation.
• (a) Low idling: Release your foot from the pedal.
• (b) Full revolution: Depress the pedal fully.
As a priority is given to the engine speed of the fuel
adjustment dial, the engine speed does not fall below the
set speed of the fuel adjustment dial even if you release your
fool from the accelerator pedal.
When performing work using the accelerator pedal, operate
the fuel adjustment dial in advance to set the necessary
minimum engine speed.
To Next Page
Loading...
