4
MAGGI WISHES TO THANK YOU FOR
CHOOSING ONE OF ITS PRODUCTS
This manual contains all the information,
advice and directions our technicians con-
sidered useful for the correct operation of
your machine.
It also contains the rules for periodical
maintenance and the spare parts cata-
logue which will allow you to keep your
radial arm saws machine in perfect work-
ing condition.
Best regards
The President
M. Landi
DECLARATION OF CONFORMITY
MAGGI ENGINEERING hereby certify that
their Radial saw has been carefully manu-
factured using the best techniques for the
manufacture of a quality product.
In addition, we hereby certify that our
Radial saw complies with the following
Directives:
• CE 89/392/CEE (Machine Directive), as
amended by 93/68/CEE and 98/37/CEE.
• CE 91/368/CEE
• CE 93/44/CEE
• CE 73/23/CEE (Low Voltage Directive),
as amended by 93/68/CEE.
• CE 89/336/CEE (EMV Directive), as
amended by 93/68/CEE.
engineering
The manufacture and assembly of the
machine have been carried out in compli-
ance with the following standardised regu-
lations:
• EN 292-1
• EN 292-2
• EN 294
• EN 349
• EN 60204-1
• EN 60529
• EN DIN 50081-2
• EN DIN 50082-2
The machine has qualified therefore for
the Conformity mark:
MAGGI ENGINEERING hereby certify that
their Radial saw has been carefully manu-
factured using the best techniques for the
manufacture of a quality product.
In addition, we hereby certify that our
Radial saw complies with the following
• CE 89/392/CEE (Machine Directive), as
amended by 93/68/CEE and 98/37/CEE.
• CE 73/23/CEE (Low Voltage Directive),
• CE 89/336/CEE (EMV Directive), as
To Next Page
Loading...
