- 80 -
LAYOUT 24 [io-std24.iom] LAYOUT 25 [io-std25.iom] LAYOUT 26 [io-std26.iom]
IN
OUT IN OUT IN OUT
Easy BOX U8IO
N°1
1 Start (T3) Start/Stop (T2) Batch code Bit4 (MSB)
2 Stop (T3)
Active batch code bit 2 (MSB) Batch code Bit3
3 Zeroing mode
Active batch code bit 1 (MSB) Batch code Bit2
4 Next zero step Ready Batch code Bit1 (LSB)
5
Ready Part good Zeroing mode
6
Part good Part trend Next Zero Step
7
Part reject Part reject Disable Stat
8
Error Cycle end Redo Step
Easy BOX U8IO
N°2
1 Batch selection - -
2 Batch code bit3 (MSB) - -
3 Batch code bit2 -
Ready
4 Batch code bit1 (LSB) - Part Good
5 Disable stat - Part Reject
6 Redo Step - Error
7 Part trend - Part Trend
8 Running - Running
Easy Box (NON
U8IO) N.1,2,3,4
1 Start/Stop (T2) Start/Stop (T1) Start/Stop (T1)
Easy Box U4S 1 Start/Stop (T2) Start/Stop (T1) Start/Stop (T1)
Easy Box U4P
1 Start (T3) Start (T3) Start (T3)
2 Stop (T3) Stop (T3) Stop (T3)
3 Zeroing mode Zeroing mode Zeroing mode
4 Next zero step Next zero step Next Zero Step
M1 Wave N.
1,2,3,..16
1 Start/Stop (T1) Start/Stop (T2) Start/Stop (T2)
Digi Crown I/O N°1
1 Start (T3) Start/Stop (T2) -
2 Stop (T3) Batch code bit2 (MSB) -
3 Zeroing mode Batch code bit1 (LSB) -
4 Next zero step
Ready -
5
Ready Part good -
6
Part good Part trend -
7
Part reject Part reject -
8
Error Cycle end -
Digi Crown I/O N°2
1 Batch selection - -
2 Batch code bit3 (MSB) - -
3 Batch code bit2 - -
4 Batch code bit1 (LSB) - -
5 Disable stat - -
6 Redo Step - -
7
Part trend --
8 Running --
In the layout Nr.26 the batch changing is on
the level, in the layout Nr.3 the batch chan-
ging is on the edge
To Next Page
Loading...