WRS – Installation Manual
WRONG POSITIONING:
In this case WRI is installed with the
glass in direction perpendicular to that
of the machine window. As you can
see in the figure, even in case of
reflections the probe is diffic
reach.
This configuration must be consi-
dered critical and be avoided.
Figure 4-31. WRI receiver positioned incorrectly.
4.10.6 Multiple receivers WRI
In case of more receivers close to each other, consider also the phenomenon of interference among the
antennas. The following are two typical applications:
CORRECT POSITIONING
The two Receivers are far from each
other and do not generate any
distortion in the transmission diagram
of the antenna of the other one.
It is
important to ensure that the two
base stations (WRI receivers) are
positioned at least 0.5 m apart.
Figure 4-32. Multiple WRI receivers positioned correctly.
To Next Page
Loading...