To Next PageTo Next PageWhat does 'NO EVEN NUMBER WITHIN THE RANGE' mean on Max LM-550A2?
The message 'NO EVEN NUMBER WITHIN THE RANGE' on your Max Label Maker means that you should reset the start and end values or select [ALL].
What does 'INITIALIZE AFTER DELETE ALL FILES' mean on Max LM-550A2?
The message 'INITIALIZE AFTER DELETE ALL FILES' on your Max Label Maker means that you should implement the initialization of settings after deleting/clearing the data in the document.
What does 'NO INPUT FILE' mean on Max LM-550A2?
The message 'NO INPUT FILE' on your Max Label Maker means that you should implement the print function after inputting the texts.
How do I resolve the 'OVERINPUT CHARACTER SIZE' error on my Max LM-550A2?
To fix the 'OVERINPUT CHARACTER SIZE' error on your Max Label Maker, reduce the number of lines, decrease the line space, or select a smaller character size.
What to do when my Max LM-550A2 is not printing correctly on the tape?
If you are having problems printing on the tape with your Max Label Maker, such as the tape not setting, no printing, blurred or stained printing, incorrect tape length, or off-center characters, try these steps: * Check the position of the switching lever. * Ensure the tape and ink ribbon are properly set. * Verify the tape width setting is correct. * Check for dirt or stains on the tape. * Adjust 'PRINTING DENSITY' and 'CUTTING POSITION' in the OPTION menu. * Ensure the feeding roller is clean and there is no waste tape or tube caught in the exit.
Why is the half-cutting function not working on my Max LM-550A2?
If the half-cutting function isn't working on your Max Label Maker, and the tape isn't being cut or the tube cutting is too shallow, ensure that: * The half cutter is properly set. * The 'Half cutting depth adjustment lever' is correctly set to the TUBE position. * The cutter isn't worn out (replace after 5,000 cuttings with LM-HC340). * There is no waste tape or tube obstructing the exit.
How to fix 'OVER PRINTING LENGTH' error on Max LM-550A2?
To resolve the 'OVER PRINTING LENGTH' error on your Max Label Maker, try the following: reduce the character space, character width, margin, or number of characters; change to a smaller character size; or select a longer print length.
What should I do if the manual cutter on my Max Label Maker isn't working?
If the manual cutter on your Max Label Maker isn't working, first check for any waste tape or tube caught in the exit. Also, the manual cutter may be worn out after approximately 30,000 cuttings, so contact your dealer for servicing, as it cannot be replaced by customers.
What causes the 'OVER PITCH LENGTH' error on my Max LM-550A2 Label Maker and how do I fix it?
The 'OVER PITCH LENGTH' error on the Max Label Maker can be resolved by changing the “PITCH LENGTH” or reducing the character space, character width, number of characters, or changing the character size to a smaller size.
What does 'OVER TOTAL PRINT LENGTH' mean on Max Label Maker, and how do I resolve it?
The 'OVER TOTAL PRINT LENGTH' error on the Max Label Maker means you need to reduce the “PRINTING LENGTH”. You can do this by dividing the file into two files or by adjusting the print range settings.
General| Brand | Max |
|---|---|
| Model | LM-550A2 Series |
| Category | Label Maker |
| Language | English |
Important instructions and warnings for safe and proper operation of the machine.
Covers critical safety information regarding electrical hazards and usage.
Advises on equipment care, environmental factors, and battery safety.
Highlights key capabilities and functionalities of the LM-550A2 series.
Explains the keyboard layout and the purpose of each key for operation.
Details the input screen layout and how to select the machine's display language.
Detailed steps for installing or replacing the ink ribbon in the ribbon case.
Instructions for loading tubes and the ink ribbon case into the machine.
Procedure for loading tape cassettes and the ink ribbon case.
How to perform pitch printing on tubes with specified content.
Procedure for pitch and normal printing text onto tape.
Methods for entering and deleting characters using the machine's interface.
Adjusting character size and width for optimal print appearance.
Configuring pitch length, pitch cut, and normal print parameters.
Covers density, LCD, font choices, and other advanced configurations.
Specifying print range, block repetition, and 180° rotation.
Adjusting the total printing length for tubes or tapes.
Steps for installing the 'LETATWIN PC Editor' and printer driver.
Printing and saving data directly between PC and the machine.
Common error messages and their corresponding countermeasures.
Solutions for common printing, tape, cutting, and USB issues.
Detailed technical data including dimensions, speed, and power requirements.
Regulatory compliance, FCC notice, and disposal guidelines.
