Maytag MDE25PN - Page 15

1-9

The PERM. PRESS button will advance
from code to code.
The WHITE AND COLORS button will
change the code value.
The DELICATES button will select or
deselect options.
FOR PN MODELS: The set-up codes are the
same as for the PD models except where
noted.
The set-up code is indicated by the one or two
left hand characters. The set-up code value
is indicated by the two or three right hand
characters. The rst value in the code column
for each section is the factory default value.
n
n
n
CODE EXPLANATION
REGULAR CYCLE PRICE
Represents the number of coins (coin 1); may adjust from 0–39
(See b.xx set-up for VALUE OF COIN 1). Advance from 0–39
by pressing WHITES AND COLORS. Factory default of 6 x coin 1.
PN MODELS ONLY: Factory default of 6 00, or 0 coins.
Press PERM. PRESS key pad once to advance to next code.
REGULAR DRY TIME
Represents the number of minutes per coin (coin 1).
Factory default of 5 minutes per coin.
Example: 6 coins x 5 minutes = 30 minutes.
By pressing the WHITES AND COLORS key pad, value adjusts
from 1–99 minutes.
PN MODELS: Represents the cycle length for free cycles.
As example: ‘7 45’ = 45 minutes.
Press PERM. PRESS key pad once to advance to next code.
TYPE OF DRYER PRICING
Fixed Cycle with Top Off. For detailed description, see General
User Information.
Fixed Cycle. For detailed description, see General User
Information.
Use DELICATES key pad to make this selection.
PN MODELS ONLY: Factory default of FC.
Press PERM. PRESS key pad once to advance to next code.
CYCLE COUNTER OPTION
This option is either SELECTED ‘ON’ or NOT SELECTED ‘OFF’.
Not Selected ‘OFF’.
Selected ‘ON’ and not able to be deselected. Press DELICATES
key pad 3 consecutive times to select ‘ON’. Once selected ‘ON’
it cannot be deselected.
Press PERM. PRESS key pad once to advance to next code.
MONEY COUNTER OPTION
This option is either SELECTED ‘ON’ or NOT SELECTED ‘OFF’.
Not Selected ‘OFF’.
Selected ‘ON’.
Press DELICATES key pad 3 consecutive times to select ‘ON’
and 3 consecutive times to remove (Not Selected ‘OFF’.) Counter
resets by going from ‘OFF’ to ‘ON’.
Selected ‘ON’ and not able to be deselected.
To select ‘ON’ and not able to be deselected, first select ‘ON’,
then within two seconds press DELICATES twice, WHITES AND
COLORS once, and exit the set-up mode.
Press PERM. PRESS key pad once to advance to next code.