CHARGING & STARTING SYSTEM
90-884294 OCTOBER 2001 Page 2B-19
Installation
1. Secure alternator to engine block with attaching bolts. Torque top bolt to 40 lb-ft (54
Nm). Torque bottom nut to 35 lb-ft (47.5 Nm).
2. Rotate belt tensioner and install alternator belt in groove of flywheel and alternator
pulley.
a
59024
a-Belt Tensioner (Rotate Counterclockwise)
3. Reconnect electrical harness to alternator.
59067
a
b
a-Top Bolt [Torque to 40 lb-ft (54 Nm)]
b-Harnesses
To Next Page
Loading...
