CHARGING & STARTING SYSTEM
90-884294 OCTOBER 2001 Page 2B-43
Starter Removal (Solenoid Driven Bendix)
CAUTION
Disconnect battery leads from battery before removing starter.
1. Disconnect battery cables from battery.
2. Disconnect wires from starter solenoid terminals.
3. Remove starter trunion mounting bolts and remove starter from engine.
59038
b
b
a
a-Starter Solenoid
b-Mounting Bolts
Starter Installation (Solenoid Driven Bendix)
1. Secure starter to engine with 4 bolts. Use right top bolt to attach BLACK NEGATIVE.
Torque top attaching bolts to 23 lb-ft (31 Nm). Torque bottom attaching bolts to 21 lb-ft.
(28.5 Nm).
To Next Page
Loading...
