POWER TRIM - DESIGN II
Page 5B-54 90-884294 OCTOBER 2001
2. Remove frame and armature from end cap. Use care not to drop armature.
53779
ab
c
a
b
c
a-Can
b-Armature
c-End Cap
Armature Tests
TEST FOR SHORTS
Check armature on a Growler per the Growler manufacturer’s instructions. Replace ar-
mature if a short is indicated.
TEST FOR GROUND
1. Use an Ohmmeter (Rx1 scale). Connect one lead on armature shaft and other lead
on commutator. If continuity is indicated, armature is grounded. Replace armature.
53786
To Next Page
Loading...
