Mercury 225 EFI - Trim Motor Removal

POWER TRIM - DESIGN II
Page 5B-50 90-884294 OCTOBER 2001
4. Inspect reservoir cover O-ring for cuts or abraisions. Replace O-ring as required.
58605
a
a-O-Ring
Trim Motor Removal
1. Secure power trim assembly in a soft jaw vise.
2. Remove 2 screws securing motor and remove motor. Remove motor O-ring (yellow)
and coupler.
3. Inspect O-ring for cuts and abraisions. Replace O-ring as required.
58611
58610
b
a
a-Screws and Washers
b-O-Ring (YELLOW)