MAINTENANCE
Page 1B-8 90-884294 OCTOBER 2001
Lubrication Points
Lubricate Point 1 with Special Lubricant 101.
1. Trim Rod Ball Ends – Turn the ball ends to work the lubricant into the ball sockets.
1
1
Lubricate Point 2 with Anti-Corrosion Grease or 2-4-C Marine Lubricant with Teflon.
2. Propeller Shaft – Refer to Propeller Replacement for removal and installation of the
propeller. Coat the entire propeller shaft with lubricant to prevent the propeller hub
from corroding and seizing to the shaft.
2
Lubricate Points 3 through 6 with 2-4-C Marine Lubricant with Teflon or Special Lubricant
101.
3. Swivel Bracket – Lubricate through fitting.
4. Tilt Support Lever – Lubricate through fitting.
3
4
5. Tilt Tube – Lubricate through fitting.
57834
5
To Next Page
Loading...
