Mercury 225 EFI - Assembly of Reed Blocks to Reed Block Adaptor Plate

POWERHEAD
90-884294 OCTOBER 2001 Page 4A-69
Assembly of Reed Blocks to Reed Block Adaptor Plate
a
b
c
d
e
f
g
NOTE : Air plenum gasket is beaded on 1 side. Bead side of the gasket faces the air plenum.
a-Torque to 90 lb. in. (10 Nm)
b-Reed Block (6)
c-Cylinder Block Cover
d-Adaptor Plate
e-Air Plenum Gasket (bead faces air plenum)
f-Air Plenum
g-Torque to 100 lb. in. (11.5 Nm)