POWER TRIM - DESIGN II
90-884294 OCTOBER 2001 Page 5B-49
Power Trim Disassembly
IMPORTANT: Power trim is pressurized. Trim rams must be in the full up position
(fully extended) prior to fill/drain plug or manual release valve removal.
1. Remove reservoir cap to drain oil.
2. Remove manual release valve to drain any remaining oil.
58604
a
b
a-Reservoir Cap
b-Manual Release Valve
3. Remove 4 screws securing reservoir cover and remove cover.
58606
a
a
b
a-Screws (4)
b-Reservoir Cover
To Next Page
Loading...
