RIGHT HAND NON-RATCHETING
Page 6A-48 90-884294 OCTOBER 2001
3. Press the bearing cup into the gear housing using the installation tool as follows:
IMPORTANT: Verify that the bearing cup is positioned as straight as possible to
avoid cocking it in the bore while pressing it in.
50791
87
Premium Gear Lubricant
87
a
b
c
d
a-Hex-Head Screw
b-Bearing Cup Installation Tool (91-18605A1)
c-Driver Cup (91-31106)
d-Shims
Shift Shaft Assembly
INSTALLATION
1. Place the shift crank onto the locating pin in the forward section of the gear housing.
Ensure that the shift crank faces towards the left (port) side of the gear housing.
50314
a
b
a-Shift Crank
b-Locating Pin
To Next Page
Loading...
