RIGHT HAND NON-RATCHETING
90-884294 OCTOBER 2001 Page 6A-49
2. Install the shift shaft assembly into the gear housing as shown. Engage the splined
end of the shift shaft with the shift crank. Verify O-ring is positioned properly and lubri-
cated with 2-4-C Marine Lubricant with Teflon. Secure shift shaft bushing with 2
screws. Torque screws to 60 lb. in. (7 Nm).
57933
a
b
a-Shift Shaft Assembly
b-Screws [Torque to 60 lb. in. (7 Nm)]
NOTE: If the pinion bearing needle bearings have fallen out, install 18 needles into needle
bearing outer race. Use 2-4-C Marine Lubricant with Teflon, to help hold needles in place.
23142
95
2-4-C Marine Lubricant With Teflon
95
a
b
a-Rollers (18)
b-Roller Bearing Outer Race
To Next Page
Loading...
