Mercury 225 EFI - Memory Piston Removal

POWER TRIM - DESIGN II
Page 5B-44 90-884294 OCTOBER 2001
4. Remove end cap from tilt rod.
51376
a
a
a-End Cap
Memory Piston Removal
1. Remove memory piston from cylinder using Snap-On lock ring pliers SRP-4 or similar
tool.
2. Remove o-ring from memory piston.
SRP-4 (Snap-On)
51144
b
a
c
a-Memory Piston
b-O-Ring
c-Snap-On Pliers SRP-4