LEFT HAND NON-RATCHETING
Page 6B-60 90-884294 OCTOBER 2001
Shift Shaft Assembly
INSTALLATION
1. Place the shift crank onto the locating pin in the forward section of the gear housing.
Ensure that the shift crank faces towards the left (port) side of the gear housing.
50314
a
b
a-Shift Crank
b-Locating Pin
2. Install the shift shaft assembly into the gear housing as shown. Engage the splined
end of the shift shaft with the shift crank. Verify O-ring is positioned properly and lubri-
cated with 2-4-C Marine Lubricant with Teflon. Secure shift shaft bushing with 2
screws. Torque screws to 60 lb. in. (7 Nm).
57933
a
b
a-Shift Shaft Assembly
b-Screws [Torque to 60 lb. in. (7 Nm)]
To Next Page
Loading...
