CHARGING & STARTING SYSTEM
90-884294 OCTOBER 2001 Page 2B-35
6. To prevent damage to brushes and springs when installing commutator end cap, it is
recommended that a brush retaining tool be made as shown:
METRIC SCALE
3”
2”
1-3/4”
1-11/16”
3/4”
1/2”
= 76.2mm
= 50.8mm
= 44.5mm
= 42.9mm
= 19.1mm
= 12.7mm
18-Gauge Sheet Metal
7. Lubricate bushing (located in commutator end cap) with one drop of SAE 10W Oil (ob-
tain locally). DO NOT over lubricate.
To Next Page
Loading...
