FUEL INJECTION
Page 3B-46 90-884294 OCTOBER 2001
2. Lift fuel rail assembly from reed block assembly.
3. Inspect o-rings for cuts and abrasions. Replace if necessary.
a
b
a a
d
c
e
59048
a-Fuel Injectors (6)
b-Fuel Rail Fuel Inlet Pipe
c-O-Rings
d-Fuel Rail
e-Reed Block Assembly
4. Individual fuel injectors and fuel inlet pipe can be removed from fuel rail by removing
attaching screws. Use Tamper Proof Torx Screw Set 91-881828 to remove screws.
58792
a a
a
b
a-Fuel Injector Attaching Screws
b-Fuel Inlet Pipe Attaching Screw
To Next Page
Loading...
