POWERHEAD
90-884294 OCTOBER 2001 Page 4A-77
6. Install 10 flat washers,and 10 locknuts which secure powerhead to exhaust extension
plate/driveshaft housing. Torque locknuts in 3 progressive steps until secured.
7. Disconnect hoist from Lifting Eye and remove Lifting Eye from flywheel.
8. Reinstall plastic cap into center of flywheel cover.
52373
a
a
a
a
a
a-Locknuts and Washers – Torque nuts to 20 lb. ft. (27 N m)
To Next Page
Loading...
