Mercury 225 EFI - Page 418

CLAMP/SWIVEL BRACKETS & DRIVE SHAFT HOUSING
90-884294 OCTOBER 2001 Page 5A-7
Drive Shaft Housing and Exhaust Tube
REF
TORQUE
REF
.
NO.
QTY. DESCRIPTION lb-in lb-ft Nm.
1
1 DRIVE SHAFT HOUSING (LONG)
1
1 DRIVE SHAFT HOUSING (X/XX–LONG)
2 4 STUD (M12 x 1.75 x 54) LONG/X-LONG
3 1
SCREW (M12 x 35) 45 61.0
4 1 GROMMET
5 5 WASHER
6 4 NUT (M12 x 1.75) 55 74.5
7 1 PLUG
8 2 SCREW (M14 x 2 x 178)
9 2 GROUND WIRE
10 2 WASHER
11 2 WASHER
12 2 MOUNT
13 2 WASHER
14 2 NUT 90 122
15 2 CLAMP
16 4 SCREW (M8 x 35) 20 27.0
17 1 LOCKWASHER
18 2 COVER
19 2 SCREW (10-16 x 7/16 IN.) Drive Tight
20 1 SEAL
21 1 EXHAUST TUBE
22 1 STRAINER
23 6 SCREW (M8 x 35) 16.5 22.5
1 WATER TUBE (LONG)
24
1 WATER TUBE (X-LONG)
1 WATER TUBE (XX-LONG)
25 1 SEAL
26 1 CLAMP
27 1 SCREW (1/4-20 x .375)
28 1 SPACER
29 2 DOWEL PIN XX-LONG
30 4 STUD (M12 x 179)
31 1 SCREW (M12 x 160)