Mercury 225 EFI - Page 498

RIGHT HAND NON-RATCHETING
90-884294 OCTOBER 2001 Page 6A-7
Gear Housing (Drive Shaft)(Standard Rotation)
REF
TORQUE
REF
.
NO.
QTY. DESCRIPTION lb-in lb-ft Nm.
1 1 GEAR HOUSING (BASIC)
2 1 PIN
3 1 FILLER BLOCK
4 1 PITOT TUBE
5 2 ANODE
6 1 SCREW 60 7
7 1 NUT
8 1 ROLLER BEARING
9 2 DOWEL PIN
10 2 SCREW ASSEMBLY 60 7
11 2 SEALING WASHER
1 HOSE(LONG - 7 IN)
12
1 HOSE (X-LONG - 12 IN)
12
1 HOSE(XX-LONG - 17 IN)
13 1 CONNECTOR
14 1 COVER
15 1 GASKET
16 1 PINION GEAR (1.75:1 - 12/21) (Part of 43-859321A3)
17 1 WASHER
18 1 NUT 70 95
19 1 OIL SEAL
20 1 O RING
21 2 SCREW (M6 x 16) 60 7
22 1 RUBBER WASHER
23 1 SHIFT SHAFT (LOWER)
1 DRIVE SHAFT (LONG)
24
1 DRIVE SHAFT (X-LONG)
24
1 DRIVE SHAFT (XX-LONG)
25 AR SHIM SET
26 1 TAPERED ROLLER BEARING
27 1 CUP
28 1 KEY
29 AR SHIM SET
30 1 TAPERED ROLLER BEARING
31 1 CUP
32 1 RETAINER 100 135
33 1 CARRIER ASSEMBLY
34 1 O RING
35 1 OIL SEAL
36 1 OIL SEAL
37 1 WATER PUMP ASSEMBLY
38 1 SEAL
39 1 GASKET
40 1 GASKET
41 1 FACE PLATE
42 1 IMPELLER
43 4 SCREW (M6 x 16) 60 7
44 1 COUPLING ASSEMBLY
45 1 O RING
46 1 O RING