LEFT HAND NON-RATCHETING
90-884294 OCTOBER 2001 Page 6B-21
OIL SEAL CARRIER ASSEMBLY – COMPONENT REASSEMBLY
The oil seals in the carrier assembly are the same diameter. The bottom (first) seal lip
faces down; the top (second) seal lip faces up. Apply 2-4-C Marine Lubricant with Teflon
to seal lips and between seals. Press seal into carrier with suitable mandrel. Second seal
should be pressed in flush with carrier surface.
95
95
2-4-C Marine Lubricant with Teflon
b
a
a-Bottom Seal (lip faces down)
b-Top Seal (lip faces up)
Bearing Carrier and Propeller Shaft Removal
1. Straighten the tab on the tab washer.
a
70490
a-Tab on Tab Washer
To Next Page
Loading...
