Mercury 225 EFI - Page 596

LEFT HAND NON-RATCHETING
Page 6B-32 90-884294 OCTOBER 2001
7. Press on the oil seal driver until the driver bottoms onto the aft face of the bearing
carrier.
50788
c
a
b
a-Oil Seal
b-Oil Seal Driver (91-31108) (long end)
c-Bearing Carrier
8. Apply a thin film of Loctite 271 to the outer diameter of the second seal.
9. Assemble the second seal (with the lips seal facing the driver shoulder) onto the short
end of the driver.
10. Press the oil seal with the driver until the driver bottoms out on the bearing carrier.
50788
7
Loctite 271
95
2-4-C Marine Lubricant with Teflon
95
c
b
a
7
a-Driver
b-Oil Seal (lips toward driver shoulder)
c-Bearing Carrier