LEFT HAND NON-RATCHETING
Page 6B-46 90-884294 OCTOBER 2001
REVERSE GEAR ASSEMBLY - COMPONENT REASSEMBLY
NOTE: Complete the instructions in this section only if the assembly components have
been disassembled and repaired or replaced.
IMPORTANT: The appearance of the forward and reverse gear is almost identical.
The forward gear has a shorter hub and is slightly smaller in diameter.
50885
REVERSE
FORWARD
3.75″ (9.5cm)
4″ (10.2cm)
a
a-Shorter Hub
1. Apply Premium Gear Lubricant to I.D. of forward gear. Press the needle bearing into
the reverse gear until tool contacts gear.
50789
b
c
a
87
87
Premium Gear Lubricant
a-Reverse Gear
b-Needle Bearing
c-Bearing Driver (91-86943)
To Next Page
Loading...
