Mercury 225 EFI - Page 654

LEFT HAND NON-RATCHETING
Page 6B-90 90-884294 OCTOBER 2001
7. Assemble the thrust collar with its STEPPED SIDE DOWN toward the small thrust
bearing.
50784
a
b
a-Thrust Collar
b-Small Thrust Bearing
8. Pull up slightly on the propeller shaft to gain access to the groove on the shaft for the
keepers. Assemble the two keepers into the groove and lower the propeller shaft.
50826
a
c
b
a-Propeller Shaft (slightly lifted)
b-Keepers (2)
c-Thrust Collar