MINI Hawk High Performance Imager User’s Manual 6-25
Symbologies
Separator Character (UPC/EAN)
Note: If Separator Character has been changed to any other character and you wish to
redefine the separator as a comma, you will need to use ESP.
Note: Whenever Separator Character is defined as a comma ( , ) sending a <K473,s?>
command will return the current settings, including the separator character comma which
appears after the separator status comma.
Important:
The ASCII characters
<
,
>
, and
,
can only be entered as hex pairs:
For <: <K473h,,,,,3C>
For >: <K473h,,,,,3E>
For
, : <K473h,,,,,2C>
See ASCII Character Entry Modifier on page 3-32 for a detailed explanation of how to
enter ASCII characters as hex values.
Usage: As required by the application.
Definition: Allows the user to change the separator character from a comma to a new
character.
Serial Cmd: <K473,UPC status,EAN status,supplementals status,separator status,
separator character,supplemental type,format UPC-E as UPC-A>
Default: , (comma)
Options: Any ASCII character.
To Next Page
Loading...
