Mindray BeneView T8 - Changing the Wave Scale

Monitoring RM
17-7
2. Select [Sweep] and select the appropriate setting. The faster the wave sweeps, the wider
the wave is.
17.5.6 Changing the Wave Scale
The wave scale changes automatically if [Scaling] is set to [Auto].
1. Select your desired waveform to enter its waveform menu.
2. Select [Scaling] and then select [Auto].
To manually adjust the wave scale (take the Paw wave for example):
1. Select the Paw waveform to enter the [Paw Waveform] menu.
2. Select [Scaling] and then select [Manual].
3. Select [Paw Scale] and then select the appropriate setting.