Calculations
20-2
20.2 Dose Calculations
20.2.1 Performing Calculations
1. By selecting [Main Menu]→[Calculations >>]→[Dose >>], or selecting
[Calculations] QuickKey→[Dose >>], you can access the following window.
2. Select, in turn, [Patient Cat.] and [Drug Name] and then select the appropriate
settings. The dose calculation program has a library of commonly used drugs, of which
Drug A through Drug E are for those not specified in this library.
Drug A, B, C, D, E
Aminophylline
Dobutamine
Dopamine
Epinephrine
Heparin
Isuprel
Lidocaine
Nipride
NItroglycerin
Pitocin
3. The system gives a set of default values when the above steps are finished. However,
these values cannot be used as the calculated values. The user must enter values
following the doctor’s instructions, and then the calculated values can only be used
4. Enter the patient’s weight.
5. Enter other values.
6. Verify if the calculated values are correct.
To Next Page
Loading...
