20-1
20 Calculations
20.1 Introduction
The calculation feature is available with your patient monitor. The calculated values, which
are not directly measured, are computed based on the values you provide.
Your can perform the following calculations:
îš„ Dose calculations
îš„ Oxygenation calculations
îš„ Ventilation calculations
îš„ Hemodynamic calculations
îš„ Renal calculations
To perform a calculation, select [Main Menu] → [Calculations >>], or the [Calculations]
QuickKey and then select the calculation you want to perform.
NOTE
z The calculation feature is independent of other monitoring functions and can be
therefore used for patients being monitored by other monitors. Any operation in a
calculation window does not affect the patient monitoring by the local patient
monitor.
WARNING
z After the calculation is finished, verify the entered values are correct and the
calculated values are appropriate. We assume no responsibility for any
consequences caused by wrong entries and improper operations.
To Next Page
Loading...
Need help?
General