Mindray BeneView T8 - Viewing Other Patients; Care Group; Understanding the View Other Patient Window

User Screen
5-6
5.4 Viewing Other Patients
5.4.1 Care Group
If your patient monitor is connected to a central monitoring system, you can select up to 16
bedside monitors into a Care Group. This lets you:
 View information on the monitor screen from other bed in the same.
 Be notified of physiological and technical alarm conditions of other beds in the Care
Group.
To have a Care Group:
1. Open the [View Other Patient] window by:
 Selecting [Other Patients] QuickKey, or
 Selecting [Screen Layout] QuickKey→[Other Patients]→[Ok], or
 Selecting [Main Menu]→[Screen Setup >>]→[Screen Layout >>]→[Other
Patients]→[Ok].
2. Select [Setup] in the [View Other Patient] window.
3. Select the desired bedside monitors from the [Connected Monitor List], and then
select the
button. The selected bedside monitors constitute a Care Group.
5.4.2 Understanding the View Other Patient Window
The first time you open the [View Other Patient] window, the patient monitor
automatically selects a monitor from the network to display in the [View Other Patient]
window.
1
2
3
4