Recording
21-6
21.5 Loading Paper
1. Use the latch at the upper right of the recorder door to pull the door open.
2. Insert a new roll into the compartment as shown below.
3. Close the recorder door.
4. Check if paper is loaded correctly and the paper end is feeding from the top.
CAUTION
z Use only specified thermal paper. Otherwise, it may cause damage to the
recorder’s printhead, the recorder may be unable to print, or poor print quality
may result.
z Never pull the recorder paper with force when a recording is in process.
Otherwise, it may cause damage to the recorder.
z Do not leave the recorder door open unless you reload paper or remove troubles.
Paper roll
To Next Page
Loading...
