Minolta Di1611 - Page 106

5.4 Making Copies on Manually Fed Paper
5
Di1611/Di2011 5-17
Before Making Copies Chapter 5
7 Using the and keys, select
the size of the paper loaded.
❍ If “OHP” was selected in step 5,
select from the following four
paper size settings.
“A4 L”
“A4 C”
“Letter L”
“Letter C”
❍ If paper with a non-standard size is
loaded, press the key, and
then use the 10-Key Pad to enter
the paper size. (For details, refer
to “To copy onto label sheets” on
page 4-8.)
?
Do you know the size of FLS
paper?
➜ The default FLS size is 210 mm × 330 mm. To change the FLS size, contact
your service representative.
8 Press the [Yes] key.
The main screen appears.
9 If necessary, specify any other copy settings.
❍ Zoom (p. 5-30)
❍ Copy density (p. 5-36)
❍ Advanced Copy Operations (p. 6-1)
10 Press the [Start] key.