Minolta Di1611 - To Select the PAPER SOURCE SETUP Menu

7.3 Setting Up the Paper Sources (“PAPER SOURCE SETUP” Menu)
7
Di1611/Di2011 7-17
Utility Mode – Copy Functions Chapter 7
To select the “PAPER SOURCE SETUP” menu
1 Press the [Utility] key.
“MACHINE SETTING?” appears.
2 Press the key once to select
“PAPER SOURCE SETUP?”.
3 From the 10-Key Pad, press the key for the “PAPER SOURCE SETUP” function
that you wish to set.
❍ The “PAPER SOURCE SETUP” functions are as follows:
1 INCH/METRIC
2 TRAY1 PAPER
3 PAPER TYPE
✎
Tip
If, at any time, you wish to quit setting a “PAPER SOURCE SETUP” function,
press the [No] key. When the message “STOP SETTING?” appears, press the
[Yes] key to quit.