Minolta Di1611 - To Specify the Printing Density (PRINT DENSITY Function)

7.2 Specifying Machine Settings (“MACHINE SETTING” Menu)
7
Di1611/Di2011 7-13
Utility Mode – Copy Functions Chapter 7
To specify the printing density (“PRINT DENSITY” function)
1 Select the “MACHINE SETTING”
menu.
❍ Refer to “To select the “MACHINE
SETTING” menu” on page 7-6.
2 Press the [6] key from the 10-Key Pad
to select “PRINT DENSITY”.
3 Using the and keys, select
one of the five settings between
“LIGHT” and “DARK”, and then press
the [Yes] key.
The “MACHINE SETTING” menu
appears again.