7.2 Specifying Machine Settings (“MACHINE SETTING” Menu)
7
Di1611/Di2011 7-11
Utility Mode – Copy Functions Chapter 7
To specify the scanning image quality (“DENSITY(ADF)” function)
1 Select the “MACHINE SETTING”
menu.
❍ Refer to “To select the “MACHINE
SETTING” menu” on page 7-6.
2 Press the [4] key from the 10-Key Pad
to select “DENSITY(ADF)”.
✎
Note
If the Document Feeder is not
installed, “
∗
NOT AVAILABLE
∗
”
appears.
3 Using the and keys, select
either “MODE1” or “MODE2”, and
then press the [Yes] key.
The “MACHINE SETTING” menu
appears again.
To Next Page
Loading...
