Minolta Di1611 - To Clear the Total Counts for All Accounts

7.5 Specifying Administrative Settings (“ADMIN. MANAGEMENT” Menu)
7
Di1611/Di2011 7-37
Utility Mode – Copy Functions Chapter 7
To clear the total counts for all accounts
1 Select the “ADMIN. MANAGEMENT”
menu.
❍ Refer to “To select the “ADMIN.
MANAGEMENT” menu” on
page 7-27.
2 Press the [2] key from the 10-Key Pad to select “COPY TRACK”.
3 Using the 10-Key Pad, enter the 6-
digit administrator access number,
and then press the [Yes] key.
The “COPY TRACK” appears.
4 Using the and keys, select
“COPY TRACK DATA?”, and then
press the [Yes] key.
5 Using the and keys, select
“CLEAR”, and then press the [Yes]
key.
A confirmation message appears,
asking whether or not to clear all
counters.
6 Press the [Yes] key.
After the message “SECTION
COUNTER CLEARED” appears, the
“COPY TRACK DATA” function
appears again.