Minolta Di1611 - Page 189

7
7.5 Specifying Administrative Settings (“ADMIN. MANAGEMENT” Menu)
7-36 Di1611/Di2011
Utility Mode – Copy Functions Chapter 7
6 Using the and keys, select the
access number for the counter that
you wish to check, and then press the
[Yes] key.
❍ The desired access (section)
number can also be entered using
the 10-Key Pad.
❍ When clearing the counter for a
specific account (section), the
access (section) number for that
account should be selected.
The total count for the selected account (section) is displayed.
7 To clear the counter, press the [No]
key.
❍ To finish without clearing the
counter, press the [Yes] key.
The “COPY TRACK DATA” function
appears again.
8 After the counter is cleared, press the
[Yes] key.
❍ After clearing the counter, if you
wish to reset the counter to the
previous count, press the
[Interrupt] key.
The “COPY TRACK DATA” function appears again.