Minolta Di1611 - To Set the PAPER TYPE Function

7
7.3 Setting Up the Paper Sources (“PAPER SOURCE SETUP” Menu)
7-22 Di1611/Di2011
Utility Mode – Copy Functions Chapter 7
To set the “PAPER TYPE” function
1 Select the “PAPER SOURCE SETUP”
menu.
❍ Refer to “To select the “PAPER
SOURCE SETUP” menu” on
page 7-17.
2 Press the [3] key from the 10-Key Pad
to select “PAPER TYPE”.
3 Using the and keys, select a
paper tray, and then press the [Yes]
key.
4 Using the and keys, select
either “PLAIN”, “RECYCLE” or
“SPECIAL”, “1-SIDE” and then press
the [Yes] key.
The “PAPER SOURCE SETUP”
menu appears again.
✎
Note
“1-SIDE” is displayed only when the machine is equipped with the Duplex Unit
(option for the Di2011 only).