3
3.4 Stopping/Restarting/Canceling a Copy Job
3-18 Di1611/Di2011
Basic Operations Chapter 3
3.4 Stopping/Restarting/Canceling a Copy Job
Follow the procedure described below to stop a copy job.
1 Specify the copy settings, and then press the [Start] key.
Copying begins.
2 During printing, press the [Stop] key.
The message “∗PLEASE WAIT!∗”
appears, and printing is stopped.
?
How can the stopped job be
restarted?
➜ When the message “PRESS THE
START KEY TO RESUME”
appears, press the [Start] key.
Printing continues.
?
How can the stopped job be
canceled?
➜ When the message “PRESS THE
START KEY TO RESUME”
appears, press the [No] key.
The message “∗COPY CANCELED∗” appears, and the job is canceled.
<Stop>
<Restart>
<Cancel>
To Next Page
Loading...
