7.4 Specifying User-Managed Service Tasks (“USER MANAGEMENT” Menu)
7
Di1611/Di2011 7-25
Utility Mode – Copy Functions Chapter 7
To perform the “TONER REPLENISHER” function
1 Press the [Utility] key.
“MACHINE SETTING?” appears.
2 Press the key twice to select
“USER MANAGEMENT?”, and then
press the [Yes] key.
3 Using the and keys, select
“TONER REPLENISHER?”, and then
press the [Yes] key.
Toner replenishing begins, and the
main screen appears.
✎
Note
While the toner is being replenished, do not turn off the machine or open the
Front Cover.
If the density of the toner is suitable, do not perform the toner replenishing
operation.
To Next Page
Loading...
