7
7.6 Specifying Copy Settings
7-48 Di1611/Di2011
Utility Mode – Copy Functions Chapter 7
To set the “SMALL ORIGINAL” function
1 Select the “COPY SETTING 1” menu.
❍ Refer to “To select the “COPY
SETTING 1” menu” on page 7-40.
2 Press the [8] key from the 10-Key Pad
to select “SMALL ORIGINAL”.
3 Using the and keys, select
“DISABLE” or “ENABLE”, and then
press the [Yes] key.
❍ If a document that cannot be
detected is loaded and “ENABLE”
is selected, the paper given
priority is used for copying.
The “COPY SETTING 1” menu
appears again.
To Next Page
Loading...
