Minolta Di1611 - To Make Copies Using the File Margin Function

6.6 Making Copies for Filing (“File Margin” function)
6
Di1611/Di2011 6-19
Advanced Copy Operations Chapter 6
To make copies using the “File Margin” function
1 Load the document to be copied.
❍ Refer to “Loading the Document” on page 3-9.
2 Press the [File Margin] key.
The “File Margin” indicator lights up.
?
Do you know how large a binding
margin is created?
➜ The width for the binding can be
set between 0 mm and 20 mm, in
1 mm increments. The
manufacturer’s default setting is
10 mm.
➜ The width of the binding margin can be changed using the “MARGIN
SETTING” function in the Utility mode (“To set the “BINDING POS.”
function” on page 7-45).
3 If necessary, specify any other copy settings.
❍ Before Making Copies (p. 5-1)
❍ Advanced Copy Operations (p. 6-1)
4 Using the 10-Key Pad, enter the desired number of copies, and then press the
[Start] key.