Minolta Di1611 - Power Supply; To Turn on the Machine; To Turn off the Machine; Default Settings

2
2.7 Power Supply
2-22 Di1611/Di2011
Precautions Chapter 2
2.7 Power Supply
To turn on the machine
Set the Power Switch to “I”.
The indicator on the [Start] key lights up in
orange, and the message “∗PLEASE
WAIT!∗” appears in the display.
✎
Note
If the [Start] key is pressed while the
indicator is lit in orange, the copy job is
queued. When the indicator on the
[Start] key lights up in green, the
loaded document is scanned and
copies are produced.
To turn off the machine
1 Check that all jobs are finished.
❍ If printed pages remain in the Copy Tray, remove them.
2 Set the Power Switch to “2”.
Default Settings
The settings that are automatically selected when the machine is turned off or the
[Panel Reset] key is pressed are called the “default settings”. These settings serve
as a reference for all functions.
Copy mode
G Number of copies: 1
G Copy density: AUTO
G Zoom ratio: Full size (× 1.00)
G Paper source: AUTO (with the Document Feeder installed)
G Finishing function: Non-sort
✎
Tip
The default settings can be customized using the functions in the Utility mode
(“7 Utility Mode – Copy Functions”).