Minolta Di1611 - To Set the AUTO PANEL RESET Function

7.2 Specifying Machine Settings (“MACHINE SETTING” Menu)
7
Di1611/Di2011 7-7
Utility Mode – Copy Functions Chapter 7
To set the “AUTO PANEL RESET” function
1 Select the “MACHINE SETTING”
menu.
❍ Refer to “To select the “MACHINE
SETTING” menu” on page 7-6.
2 Press the [1] key from the 10-Key Pad
to select “AUTO PANEL RESET”.
3 Using the and keys, select
either “ON” or “OFF”, and then press
the [Yes] key.
❍ If “OFF” was selected, the
“MACHINE SETTING” menu
appears again.
4 Using the and keys, select
“0.5”, “1”, “2”, “3”, “4” or “5”, and then
press the [Yes] key.
The “MACHINE SETTING” menu
appears again.