4
4.1 Specifying a Zoom setting
4-2 Di1611/Di2011
Useful Operations Chapter 4
4.1 Specifying a Zoom setting
To enlarge/reduce a standard-sized document to a different standard size
As an example, the following procedure describes how to enlarge a B5-size
document to an A4-size document.
1 Position the document(s) to be copied.
❍ Refer to “Loading the Document” on page 3-9.
2 Press the [Zoom] key.
“B5 → A4” appears in the display.
✎
Note
With each press of the [Zoom] key,
the preset zoom ratio that is
displayed changes one setting at a
time.
3 Check the setting for the size of paper
to be printed on.
❍ If “AUTO” is displayed, check that
A4-sized paper is loaded into the
paper tray.
❍ If “AUTO” is not displayed, press
the [Paper] key until “AUTO” is displayed.
❍ For details on changing the paper size setting for the paper tray, refer to
“Setting Up the Paper Sources (“PAPER SOURCE SETUP” Menu)” on
page 7-16.
To Next Page
Loading...
