4
4.3 Copying Onto Various Types of Media
4-8 Di1611/Di2011
Useful Operations Chapter 4
To copy onto label sheets
As an example, the following procedure describes how to make copies onto
200 mm × 250 mm label sheets loaded into the 1st Tray.
1 Position the document(s) to be copied.
❍ Refer to “Loading the Document” on page 3-9.
2 Adjust the paper guides in the 1st
Tray, and load the label sheets.
❍ Load label sheets so that the
surface to be printed on faces
upward, as shown in the
illustration.
3 Press the [Utility] key twice.
The “PAPER SOURCE SETUP”
menu appears.
4 From the 10-Key Pad, press the [2]
key.
“TRAY1 PAPER” appears.
To Next Page
Loading...
